Maintenance of electric locks: tips to extend their useful life

Electric strikes are a fundamental part of security in any business, as they control access to areas and protect property and people. To ensure their correct functioning and prolong their lifespan, it's essential to perform periodic maintenance. Here are some practical tips:

1. Regular Cleaning

• Exterior: Use a damp cloth with water and neutral soap to clean the surface of the strike, removing dust and dirt. Avoid abrasive products that could damage the finish.
• Interior: Open the strike's casing (if possible and following the manufacturer's instructions) and use a soft brush to remove dust and accumulated dirt from the internal components.

2. Lubrication

• Moving parts: Apply a specific aerosol lubricant for locks on the moving parts, such as the latch and the bolt. This will ensure smooth operation and prevent premature wear.
• Cylinder: If the strike has a cylinder, use a graphite powder lubricant to prevent it from jamming.

3. Connection Review

• Cables: Periodically verify that the cables are well connected and show no signs of damage. A loose or damaged cable can cause failures in the strike's operation.
• Terminals: Ensure that the terminals are clean and free of rust. You can use a fine wire brush to clean them if necessary.

4. Adjustment

• Latch: If the latch does not go in and out smoothly, it may need adjustment. Consult the manufacturer's instructions to make the correct adjustment.
• Screws: Periodically check that the fixing screws are tight. Loose screws can cause operating and security problems.

5. Weather Protection

• Sealing: If the strike is exposed to the elements, make sure it is well sealed to prevent the entry of water and dust. You can use silicone or putty to seal the joints.
• Rust: If the strike shows signs of rust, use a wire brush and fine sandpaper to remove it. Then, apply a coat of anti-rust paint to protect it.

6. Professional Maintenance

• Technician: It is recommended to hire a technician specializing in electric locks to perform professional maintenance at least once a year. The technician will be able to review the strike in detail, make necessary adjustments and repairs, and ensure its correct functioning.

7. Component Replacement

• Worn parts: If any part of the strike is worn or damaged, replace it immediately. Always use original spare parts to ensure compatibility and proper operation.

By following these tips, you can prolong the lifespan of your electric strikes and ensure the security of your business. Remember that preventive maintenance is the best way to avoid problems and costly repairs in the future.

If you have any questions or need more information, do not hesitate to contact us. We will be happy to help!